Benjamin Moore paint designation - Contractor Talk
1261 posts · Joined 2019. #5 · Feb 9, 2023. PM designates pre-mixed. Ben Moore in the nineties had pre-mixed colors. The newer generation paint mixer, Genex,. Eliminated the premixed paints. Premix used to be a few bucks cheaper than a custom color but that's all changed. HC is the historical pallette. OC original color pallette.
best paint to use for porch floor? - Contractor Talk
Apr 10, 2009 · The most durable paint that I have experience with on porches is SW Armorseal/Treadplex. I painted 200 yards of raw wood bleachers at a local high school a couple of years ago and they still look solid. The only sheens are semi and gloss. This product is undoubtedly one of the most durable paints for a porch or deck.
Paint or stain on hardi plank? - Contractor Talk
Jan 28, 2009 · BRUNING PAINT CO. (305) 781-1441 PrimePlus® Carriage House Exterior 100% Acrylic House Paints: #310-00 line Flat, #316-00 line Satin, #315-00 line Semi-Gloss House & Trim. Apply each coat at 400 square feet per gallon (4 mils wet). (206) 762-9274 PrimePlus® 02200 Flat, 02303 Satin, or 02010 Eggshell Latex House Paints.
Glidden Paint ? | Contractor Talk - Professional Construction and ...
Dec 16, 2004 · Dark Mode; Light Mode
painting fiberglass columns | Contractor Talk - Professional ...
Apr 30, 2009 · 1) Sand with 80 grit paper. 2) Primes with latex ICI gripper primer. However, any high quality bonding primer should work fine. Make sure it will work on fiberglass though. Check the info. 3) Finish coat with any good exterior product. the columns I did were pretty huge so I used a 1/2'' sleeve.
Paint Comparison, Benjamin Moore, Glidden, Sherwin, Kilz
Nov 11, 2014 · The paint that I tested are from Sherwin Williams, Glidden, Benjamin Moore and Kilz (Behr). All the paint was applied with a 4”, 3/8 roller, and the roller was loaded the same for each paint. I would normally not add this but after seeing a Behr rep make a display I’m going to also state that the drywall was painted vertically.
Spraying Benjamin Moore Advance with HVLP - Contractor Talk
Mar 30, 2013 · I'm about to try the Benjamin Moore Advance waterborne alkyd on some trim and cabinets. BM recommends HVLP, which is fine. Just wondering what your thoughts are on thinning and using a paint conditioner. BM recommends no more than 6% thinning, but my experience with typical latex is closer to 20-25% thinning with HVLP.
rambling on about Benjamin Moore and Aura - Contractor Talk
Jun 7, 2008 · I don't know of any pro painter who does the necessary prep work that has had a problem with Benjamin Moore paints peeling or a problem with the paint breaking down after a few years. However in the last while Ben Moore did pass out a flyer in my area advising painters to sand/clean pre- primed trim and doors cause of complaints of silicone ...
Deck Paint Cure and Blisters - Contractor Talk
Jul 30, 2009 · D. Dorman Painting. 319 posts · Joined 2006. #2 · Jul 31, 2009. This is very common in humid, moist and rainy areas. Moisture gets trapped under the fresh coat and the bubbles are the result. My advice is to not even touch the bubbles and let the moisture pass through and they normally suck back in.
Painting Concrete Patio - Contractor Talk
Mar 9, 2008 · Benjamin Moore Has A Product That Is A Latex Non Skid That Acts As A Cool Deck Surface Also. It's Called Anti Skid M55. Comes In Several Colors And Can Be Tinted To Light Colors. You Will Need To Fill Ctacks With An Elastomeric Caulk First Also Prime With A 100% Acrylic Primer After Cleaning First.