The print took approximately 60 minutes and used 30 grams of black ... I screwed in the bottom half of the antenna for positioning, peeled off the double-sided tape on the mount, and slid it into ...

The research group is planning to consolidate metallic powders into novel alloys using an advanced powder atomizer and multiple types of metal 3D printers housed in the Applied Research Building.

AUSTIN, Texas—Because GPS can be spoofed or jammed in combat, one geospatial intelligence company developed a drone-navigation system based on 3D maps. Peter Wilczynski, Maxar’s chief ...

Imagine a robot that can walk, without electronics, and only with the addition of a cartridge of compressed gas, right off the 3D-printer. It can also be printed in one go, from one material. That is ...

[du Maugouër] combined a 3D printed back and four M2x6mm screws to make a robust new mount to replace the broken OEM mount on his handlebar-mounted GPS. Slots for zip tie mounting are included in ...

WIth that done, a simple 3D printed camera mount is designed with three flexible joints between the camera and the base which is rigidly coupled to the RC boat or car’s body. The modal analysis ...

Since then, PC Labs has reviewed more than 60 3D printers built around different applications and print technologies. They have ranged from professional printers that cost $5,000 down to budget ...