An ultra-low power sensor operates using energy harvesting from various sources for efficient monitoring. The oscillator ...

The device integrates Septentrio’s mosaic-T GNSS timing receiver, Espressif’s ESP32-WROVER processor and the SiTime SiT5358 disciplined 10 MHz oscillator on a single circuit board. It is housed in a ...

Abstract: This brief presents a 357-706 MHz dual-mode lowpass filter featuring an oscillator-based calibration method to address bandwidth deviations caused by process variations and component ...

Implemented in the 28-nm CMOS technology, the proposed 270-GHz oscillator achieves a peak output power of -3.2 dBm, a peak dc-to-RF efficiency of 0.81% and phase noise values of -56.8, -84.68 and ...

The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell. 100 MHz programmable oscillator These libraries are offered at both 16nm and a 12nm shrink. They are available in ...

The 1.8V 100MHz Oscillators library includes a programmable oscillator macro I/O cell. 100 MHz programmable oscillator These libraries are offered at both 16nm and a 12nm shrink. They are available in ...

Enter the oven controlled crystal oscillator, or OCXO. These do basically what it says on the tin, but what’s inside them? [Kerry Wong] took apart a vintage Toyocom TCO-627VC 10 MHz OCXO ...

Because of the large deviation, 56000 baud is not recommended for use with a 1.8432 MHz crystal. An empty space in the table ... Using I2C in 400 Kbit/sec mode is recommended over the default of 100 ...