The preaccumulator U2 interfaces the 100 MHz count rate to moderate speed (~6.25 MHz) counter timer peripherals without losing resolution. The core of Figure 1’s circuit is a very simple Q1, U1, D5 ...

Figure 1 Featuring a 160-dB dynamic range corresponding to a 1-Hz- to 100-MHz-frequency span, this voltage-to-frequency converter operates from a single 5V power supply. Figure 2 On a 700-MHz ...

The 3.3V 100MHz Oscillators library provides a 100 MHz crystal oscillator macro I/O cell. An adapter cell is included to utilize this oscillator with libraries based on the 1.8V pad ring bus structure ...

The mode-locked Ti:sapphire oscillator pumped with 5-W power from a Verdi-V5 diode ... We run routinely the 10-TW-class CPA Ti:sapphire laser system, and a 100-MHz femtosecond multi-terawatt laser ...

100 MHz ultra low phase noise OCXOs from NEL, offer close-in phase noise of -135 dBc/Hz and -180 dBc/Hz phase noise on the floor. Coming in 14 x 21 x 6.8 mm surface-mount packages, the oscillator ...

You can do this by connecting the output of a 100-MHz signal generator to the counter and counting for one or 10 seconds. Also, the counter time-base oscillator should be calibrated using WWV or a ...

Lots of stuff, including modifying it for use with the QO-100 geosynchronous ... local oscillator on the LNB to be referenced to an external signal generator; when fed with a 25.78 MHz signal ...

The device has a seven-inch touchscreen and claims to be a two-channel 100 MHz scope. But is it? Watch the video below and you’ll see. Spoiler alert: [LearnElectronics] was skeptical of the 100 ...

The 3.3V 100MHz Oscillators library includes a programmable oscillator macro I/O cell. 100 MHz programmable oscillator These libraries are offered at both 16nm and a 12nm shrink. They are available in ...