WEBThe METABOX drawer system can be installed in either panel or face-frame con-structed cabinets with optional rear mount-ing sockets. METABOX drawers have a static load capacity of 100 pounds and a dynamic capacity of 75 pounds and are tested to perform 100,000 open/close cycles without failure.
WEBPreparing drawer boxes Build drawers according to the specifications given for the MOVENTO runners you chose and the measurements determined in Step 1. Install appropriate locking devices and bore holes to accept rear hooks. Insert drawers Extend the runners fully. Place the drawer on the runners and close.
WEBDRAWER SLIDES & DRAWER BOXES 1) Check CABINET DEPTH. Refer to depth chart of Dynamic NT slides. Measure from outside of face frame or European side panel to the cross stretcher/cabinet back. Choose the correct length of slide. (See page 9 of Dynamic NT brochure at View Data Sheet) 2) Once slide is chosen, …
WEBdrawer box. Dynamic NT roller bearing slides convince through superior running conditions: with ease you can extend the drawer boxes, and with a gentle push the slides glide back into the closed position. Soft-close slows your drawer softly and closes it quietly. The new Dynamic NT is a unique element in your cabinet that your customer will ...
WEBvertical adjustment to simplify setting drawer reveals. • Compatible with 32 mm and traditional hole patterns. • Flexible mounting tabs allow for variation in side space.
WEBdrawer fronts by providing precise depth adjustment - Adjustable stop preset at 0mm allows the drawer to be adjusted out up to 4mm (3/16") - Self-locking depth adjustment screw maintains depth setting - Adjustments can be made with the drawer installed - For use with TANDEM plus 562 H/F (BLUMOTION recommended) For mounting hole position,
WEBperfectly align drawer fronts. - Offers 4mm (3/16") out adjustment, preset at 0mm - Designed for 1/2" bottom recess - Height adjustable +3 (1/8") - For use with 562 / 568 Installation screws Using TANDEM page 13 Drawer preparation page 14 - Two required per drawer - Depth and side-to-side self-alignment - Zinc-plated steel